Windows Media Player Download Link
The video clips discussed on this page were edited (compressed) using a Windows Media Player friendly
software. The file sizes have been drastically reduced for faster transfer. Unfortunately, the quality of the
video has also been reduced in the process.
These video clips weren't designated as streaming video files, so it may be necessary to
Right Click on the link, then "Save Target As" to the location (on your PC) of your choice.
You may need to adjust your player to allow "Windows Media Audio/Video file" (WMV) format files.
(In the player window click view ... options ... formats ... then select Windows Media Audio/Video file.)
(2001) Flying Crank Ghost 259 KB
Early testing of the skeleton marionette on the f.c.g. mechanism.
Sadly, no night video is available.
(2002) Simple Pop-Up 392 KB
A short compilation of clips. Includes the arm mechanism, a pre-body clip, and the finished product.
(2002) Jumping Mechanism 428 KB
The Jumping Mechanism with latex skeleton prop attached. Side view of assembly,
plus "in-room" view, H.H.H. 2002.
(2003) LowBoy 234 KB
The LowBoy machine, side view.
(2003) LowBoy/Ambush 262 KB
Testing the finished assembly, LowBoy machine and Ambush prop torso.
(2003) Emerge 226 KB
The Emerge machine, side view.
(2003) Emerge/Ambush 290 KB
Testing the finished assembly, Emerge machine and Ambush prop torso.
(2003) Subdued 226 KB
The Subdued machine, side view, high speed.
(2003) Subdued/Ambush 360 KB
Testing the finished assembly, Subdued machine and Ambush prop torso.
(2003) Three Amigos 628 KB
LowBoy, Emerge, and Subdued up and running.
Rear view (linkages) and front view (props).
(2004) Obelisk Arm Mechanism 195 KB
Testing the (left arm) cable control configuration.
(2004) Obelisk Body Armature 136 KB
Testing the motion(s) of the body armature.
(2004) Obelisk Lid Lift 428 KB
The motion that opens the Obelisk front, revealing the prop body.
Upper body skins in place, unfinished.
(2004) Obelisk Body Motion 141 KB
The secondary prop motion - the body "lunge." Upper body skins in place, unfinished.
(2004) Obelisk Plywood Skin 336 KB
Adding the outer shell of the prop.
Body skins in place, painted.
(2004) Obelisk, Completed, Side View 408 KB
Testing the finished prop, side view
(2004) Obelisk, Completed, Haunt View 518 KB
The finished Animated Obelisk Prop, daylight view.
(2005) Skeleton Marionette, Test Flight 01 502 KB
Testing the prop on a Phantasmechanics-style flying rig before detailing/finishing.
(2005) Skeleton Marionette Wing Test 548 KB
Video clip showing the testing of the prop in action, with newly added wings.
(2005) SoulSpill Machine 534 KB
Basic mechanism operation, testing.
(2005) SoulSpill Leg Linkages (375 KB)
Range of motion, added leg linkage members, testing.
(2005) SoulSpill Skins (434 KB)
All latex skins added, testing range of motion.
(2005) SoulSpill Paint, front view (417 KB)
Finished paint, prop in action, front view.
(2005) SoulSpill Paint, fog, corner view (475 KB)
Added fog effect, corner view of painted prop.
(2006) Bellicose machine test (658 KB)
Early mechanical tests of the Bellicose prop moving machine.
(2006) Bellicose machine test with prop body (591 KB)
Testing the assembled Bellicose machine with unfinished prop body.
(2006) Bellicose haunt (1.81 MB)
Testing and operational footage of the Bellicose machine.